what do you need to download to get the hp t520 36 in. print preview box to show up

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP Designjet T120 and T520 ePrinter Series - Advanced print settings

The balance of this affiliate explains the various print settings that you can use. These methods offering a relatively large number of settings in order to satisfy all requirements.

note:
In general yous are recommended to use the default settings unless yous know that they do not run into your requirements.

note:
If you intend to reuse a particular grouping of settings repeatedly, you can save those settings nether a name of your ain choice and think them later. A saved grouping of settings is known every bit a 'quick gear up' in the Windows printer driver.

Select print quality

The printer has various impress-quality options because best-quality press requires some loss of speed, while fast printing implies some reduction in impress quality.

Therefore, the standard print-quality selector is a slider that allows you to choose between quality and speed. With some newspaper types, you can choose a compromise position between the 2.

Alternatively, you tin select from the custom options: Best, Normal and Fast. If you select Fast, you lot can also select Economode, which uses a lower rendering resolution and consumes less ink. It therefore increases printing speed fifty-fifty further, only reduces impress quality. Economode can be selected simply from the custom options (not from the slider).

At that place is also a supplementary custom option that may accept an consequence on print quality: Maximum detail. Run across High-quality press.

note:
In the Windows driver dialog, the rendering resolution for your job is displayed in the Custom Print Quality Options dialog box (select Custom options and so Settings).

Rendering resolution is not shown on Mac.

You tin select print-quality options in the following ways:

In the Windows commuter dialog: go to the Newspaper/Quality tab and look at the Impress Quality section. If you lot select Standard Options, y'all will see a simple slider with which yous can select speed or quality. If you select Custom Options, you will come across the more specific options described above.
In the Mac Os X Print dialog: go to the Paper/Quality panel and await at the Quality Options department. If you select Standard quality options, you lot will run into a unproblematic slider with which yous tin can select speed or quality. If you select Custom quality options, you will see the more than specific options described above.

note:
You cannot alter the print quality of pages that the printer is already receiving or has already received (even if they have not started to impress yet).

Select paper size

Paper size can be specified in the following ways.

note:
The paper size specified here should exist the paper size in which the document was created. It is possible to rescale the document to a dissimilar size for printing. See Rescale a impress.

In the Windows driver dialog: select the Paper/Quality tab, then select your newspaper size from the Document Size list.
In the Mac OS Ten Page Setup dialog: select your printer from the Printer list, then select your paper size from the Paper Size list.

notation:
If your awarding offers no Page Setup dialog, please utilise the Print dialog.

Custom paper sizes

If you want to choose a paper size that is not included in the list of standard paper sizes, there are diverse dissimilar means to specify it.

Use the Windows printer driver

Select the Newspaper/Quality tab.
Press the Custom button.
Enter the proper name and dimensions of your new newspaper size.
Press OK. The new paper size is automatically selected.

A custom paper size created in this way has the following characteristics:

The paper size is permanent. It volition non disappear if the commuter is closed or the computer is turned off.
The paper size is local to the printer queue. It volition non be seen from other printer queues in the same computer.
In Domain server networks, the newspaper size is local to the figurer. It will not be seen from other computers sharing the printer queue.
In Workgroup networks, the paper size will exist shared amid all the computers sharing the printer queue.
If the printer queue is deleted, the paper size is deleted with it.

Use Windows forms

Windows Vista or XP: From the Start menu, or from the Command Panel, select Printers; then, from the File menu, select Server Properties.

Windows seven: From the First card, or from the Control Panel, select Devices and Printers, and then Select a Printer, then Select Print Server Backdrop.
In the Forms tab, check the Create a new form box.
Enter the name of your new paper size.
Select Units (Metric or English language).
Enter the dimensions of your new newspaper size. Exit the margins as 0.00.
Press the Save Course push button.
Get to the printer commuter, and select the Paper/Quality tab.
Select More… from the drop-down list of paper sizes.
Select your new newspaper size from the grouping of Custom sizes.

Above is an example in Windows 7.

A custom newspaper size created in this style has the post-obit characteristics:

The paper size is permanent. It will not disappear if the driver is closed or the estimator is turned off.
Restricted users cannot create paper forms. The "manage documents" function in the Windows Active Directory is the minimum required.
The paper size is local to the computer. It will be seen in all the printer queues that have been created on the computer and that support paper of that size.
If a printer queue is shared, this newspaper size will announced in all the customer computers.
If a printer queue is shared from some other computer, this paper size volition non announced on the driver´s document size list. A Windows form in a shared queue needs to be created in the server.
If the printer queue is deleted, the paper size is not deleted.

Use the Mac Bone X printer driver

Become to the Folio Setup dialog.

notation:
If your awarding offers no Folio Setup dialog, please use the Print dialog.
Select Paper Size > Manage Custom Sizes.

Select margins options

By default, the printer leaves a 5 mm margin between the edges of your paradigm and the edges of the paper, increased to 17 mm at the foot (trailing border) of cut-sheet paper. However, you tin alter this beliefs in several ways.

In the Windows driver dialog: select the Newspaper/Quality tab then the Margins/Layout push.
In the Mac OS 10 Print dialog: select the Margins/Layout console.

You volition so see at least some of the post-obit options.

annotation:
Nether Mac Os X, the available margins options depend on the paper size selected.

Standard. Your image will exist printed on a page of the size yous have selected, with the default margin between the edges of the image and the edges of the paper. The epitome should be small enough to fit betwixt the margins.
Oversize. Y'all should load paper that is larger than the size you lot selected in the application or driver. If you cut off the margins after press, you will be left with a page of the size you selected, with no margins remaining betwixt your image and the edges of the paper. This is useful when you desire your image to embrace the whole area of the paper.
Clip Contents By Margins. Your image volition be printed on a page of the size you lot have selected, with the default margin between the edges of the image and the edges of the paper. In this example, if the image is the same size as the page, the printer assumes that the extreme edges of the paradigm are either white or unimportant, and do not need to be printed. This may be useful when your paradigm already contains a edge.

Print on loaded paper

To print a task on whichever paper is loaded in the printer, select Whatever in the Paper Blazon option of your printer driver.

In the Windows commuter dialog: select the Paper/Quality tab, and then select Any in the Newspaper Blazon drop-down listing.
In the Mac OS X Impress dialog: select the Newspaper/Quality panel, then select Any in the Newspaper Type drop-downwards list.

note:
Any is the default Newspaper Type choice.

Rescale a print

Y'all can ship an image to the printer at a certain size only tell the printer to rescale information technology to a different size (usually larger). This may exist useful:

If your software does not support large formats
If your file is too large for the printer's memory—in this case, you can reduce the paper size in your software and then scale it up again using the front-panel option

You tin rescale an image in the post-obit means:

In the Windows driver dialog: become to the Features tab and await at the Resizing Options section.
- The Print document on pick adjusts the image size to the newspaper size you lot have selected. For example, if you have selected ISO A2 as the paper size and you print an A3-sized paradigm, it is enlarged to fit the A2 paper. If the ISO A4 newspaper size is selected, the printer reduces a larger image to fit the A4 size.
- The % of actual size choice enlarges the printable area of the original newspaper size (the folio minus the margins) by the percentage indicated, then adds the margins to create the output paper size.
In the Mac OS X Impress dialog: select the Paper Treatment panel, then Scale to fit newspaper size, and select the paper size to which yous want to scale the image. If you desire to increase the size of the paradigm, make certain that the Scale down just box is unchecked.

If you are printing to a single sail, you must ensure that the paradigm can actually fit onto the canvas, otherwise the epitome volition be clipped.

Impress a typhoon

Yous can specify fast draft-quality press in the following ways:

In the Windows driver dialog: go to the Paper/Quality tab and await at the Print Quality section. Motility the impress-quality slider to the extreme left ('Speed').
In the Mac OS Ten Print dialog: get to the Paper/Quality console and move the impress-quality slider to the extreme left ('Speed').

Yous can specify even faster draft-quality press past using Economode, equally follows. This is intended mainly for documents containing only text and line drawings.

In the Windows driver dialog: go to the Paper/Quality tab and look at the Impress Quality department. Select Custom Options, then set the quality level to Fast and check the Economode box.
In the Mac OS X Impress dialog: go to the Paper/Quality panel and set the quality options to Custom, and so set quality to Fast and check the Economode box.

Loftier-quality printing

Y'all can specify high-quality printing in the following means:

In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. Movement the print-quality slider to the extreme right ('Quality').
In the Mac Bone Ten Print dialog: get to the Paper/Quality panel and movement the print-quality slider to the extreme right ('Quality').

If you have a loftier-resolution image

If your image has a resolution greater than the rendering resolution (which y'all tin can see in the Custom Print Quality Options box under Windows), print sharpness may be improved past selecting the Maximum Detail option. This option is available only if you are printing on glossy paper and you take selected Best print quality.

In the driver dialog (Mac Os X Print dialog): select Custom instead of Standard impress-quality options, then cheque the Maximum Detail box.

annotation:
The Maximum Detail option results in slower printing with photo papers, but it does non increase the amount of ink used.

Employ paper economically

You may exist able to save some whorl paper past using the post-obit options:

In the Windows driver dialog: select the Features tab and and so Remove top/bottom bare areas and/or Rotate by 90 degrees or Autorotate.
In the Mac Os X Print dialog: select the Finishing panel, then Remove Bare Areas.

Use ink economically

Here are some recommendations for making economical use of ink.

For typhoon prints, use apparently paper and motion the print-quality slider to the left end of the scale ('Speed'). For further economy, select custom print quality options, then select Fast and Economode.
Make clean the printhead only when needed. Cleaning the printhead can exist useful, only information technology uses a small amount of ink.
Leave the printer permanently turned on so that it tin can maintain the printhead in adept condition automatically. This regular printhead maintenance uses a small amount of ink. However, if it is not done, the printer may need to use much more than ink later to restore the health of the printhead.
Wide prints brand more efficient utilise of ink than narrow prints, because printhead maintenance uses some ink, and its frequency is related to the number of passes made past the printhead.

duncanachim1942.blogspot.com

Source: https://support.hp.com/id-en/document/c03559791